Create an Upholstered Headboards Queen
Upholstered headboards queen – A bed without a headboard can make a room look unfinished. But wooden and wrought iron headboards can be very expensive and take up valuable floor space in a bedroom. Upholstered headboards queen that is directly on the wall and provides a comfortable place to lean against and will not take up floor space. The construction of a headboard can be a relatively easy weekend DIY project.
To create an upholstered headboards queen, lay batting flat on the floor or another large worksheet. Lay your plywood on top of the batting. Cut the batting same size as the multiplex. Place the fabric on the work surface. Put headboard on top with batting down. Cut fabric so that you have six to eight centimeters overhang around the perimeter of the plywood. Pull to secure the edges of the fabric over the edge of the plywood and stapling. Tightening, stapling approximately 1 inch intervals. Turn the head often to smooth out wrinkles or lumps.
Upholstered headboards queen, Trim excess fabric at the back of the head so that the work will rest flat against the wall. Attach picture hanging hardware on the back of your head. Use your pre-painted molding trim pieces to the frame directly on the wall around your head. Fix the square trim pieces on the wall at the corners of the headboard using finishing nails. Measuring a right angle to the next to determine how to cut the sides of the frames. Fill any folds and nail holes with putty.